Medium: light petroleum products, superheated water, hydraulic oils, not installed on aggressive
liquids and gases
Safety function: Normally Closed (NC) (ESK 400 Series) and Normally Open (NO) (ESK 401 Series)
Control type: pilot
Number of strokes: 2/2 (Ports / Positions)
Dimensions: G1 / 8 "- G2"
Connection: Thread G (BSPP / ISO 228-1)
Pressure ranges: 0.35-16 bar (1 / 8 "... 1" Series ESK400), 0.5-12 bar (11 / 4 "... 2" Series ESK400), 0.35-12 bar (1 / 8 "... 1" Series ESK401), 0.5-10 bar (11 / 4 "... 2" Series ESK401)
Media temperature: -10 °C – +160 °C
Ambient temperature: -20 °C – +70 °C
Opening time: 200ms – 1500ms
Closing time: 500ms – 2000ms
Maximum viscosity: 38cSt or mm2/s
Maximum allowable pressure: 24 bar (Series ESK400), 18 bar (Series ESK401)
Required minimum pressure drop: 0.35 bar (for 1/8"…1") and 0.5 bar (for 11Medium: light petroleum products, superheated water, hydraulic oils, not installed on aggressive liquids and gases Safety function: Normally Closed (NC) (Series ESK 400) and Normally Open (NO) (Series ESK 401)
Control type: pilot
Number of strokes: 2/2 (Ports/Positions)
Dimensions: G1/8" – G2"
Connection: Thread G (BSPP / ISO 228–1)
Pressure ranges: 0.35–16 bar (1/8"…1" Series ESK400), 0.5–12 bar (11/4"…2" Series ESK400), 0.35–12 bar (1/8"…1" Series ESK401), 0.5–10 bar (11/4"…2" Series ESK401)
Media temperature: -10 °С – +160 °С
Ambient temperature: -20 °С – +70 °С
Opening time: 200ms – 1500ms
Closing time: 500ms – 2000ms
Maximum viscosity: 38cSt or mm2/s
Maximum allowable pressure: 24 bar (ESK400 Series), 18 bar (ESK401 Series)
Required minimum differential pressure: 0.35 bar (for 1/8"…1") and 0.5 bar (for 11/4"…2"), internal exhaust system (for ESK401 Series)
Valve seal: O-rings
Voltage: AC, DC
Rearrangement of the coil without dismantling the valve (independently AC, DC)
High flow capacity, high reliability and robustness
Various flow ranges, wide range of openings
Installation in any position, but best with the coil facing up
The medium must be filtered before the valve
Flow (Q) can be calculated based on the pressure, density and flow coefficient
In accordance with 97/23/EC Directive on equipment operating Pressure Equipment Directive (PED), 2006/95/EEC Low Voltage Directive (LVD), 2004/108/EC Electromagnetic Compatibility Directive (EMC)/4"…2"), internal exhaust system (for ESK401 Series)
Valve seal: O-rings
Voltage: AC, DC
Coil reversal without dismantling the valve (independent of AC, DC)
High flow capacity, high reliability and robustness
Various flow ranges, wide range of openings
Installation in any position, but optimally with the coil facing upwards
The medium must be filtered before the valve
Flow rate (Q) can be calculated from the pressure, density and flow coefficient
According to 97/23/EC Pressure Equipment Directive (PED), 2006/95/EEC Low Voltage Directive (LVD), 2004/108/EC Electromagnetic Compatibility Directive (EMC)